The DEWALT DCK296M2 20V XR Lithium Ion Premium Brushless Hammer/Impact Combo (4.0Ah) features a DEWALT-built brushless motor that delivers up to 57% more run time over brushed. The XR Li-Ion batteries with fuel gauge provide 33% more capacity over standard packs. The DCD995 20V MAX1/2" hammerdrill features a 3-speed, high performance (0-2,000 RPM) all-metal transmission that optimizes tool-to-task for fast application speeds and improved run time; 0-34,000 BPM for fast drilling in masonry materials; a compact size at 8.4" front-to-back length and lightweight at 4.7 lbs. Great for fitting in tight areas. The DCF886 20V MAX 1/4" impact driver provides 1,500 in-lbs. of max torque at fast 0-2,800 RPM speed and 0-3,200 impacts per minute; a compact size at 5.6" front-to-back length and lightweight at 3.4 lbs. Also great for fitting into tight areas. Both tools feature LED lights with 20 second trigger release delay, providing increased visibility in dark or confined spaces. Total kit includes: (1) DCD995 1/2" Hammerdrill, (1) DCF886 1/4" Impact Driver, (2) 20V MAX XR High Capacity Li-Ion Batteries (4.0Ah), (1) Fast charger, (2) Belt Hooks, (1) Bit Holder, (1) 360Degree side handle and Contractor Bag.
NitroCat 1200-K 1/2-Inch Kevlar Composite Air Impact Wrench With Twin Clutch Mechanism
This NitroCat 1/2in. square drive impact wrench with 1295 ft.-lbs. of torque and Kevlar composite body outperforms anything in its class! It is used by many NHRA Top Fuel race teams. Kevlar adds high strength and durability to the 1200-K, making this tool a valuable addition to your air tool work force. Noise Level (dB): 86, Variable Speed: No, Case Included: No, Min. Hose Size (in.): 3/8, Hammer Mechanism: Twin clutch, Reversible: Yes, CFM at Load: 4.5, Inlet Size (in.): 1/4, Average Air Consumption (CFM): 4, Drive (in.): 1/2, Impacts Per Minute (IPM): 950 under load, Operating PSI: 90-120, Speed - No Load (RPM): 8,000, Tool Length (in.): 8 1/4, Max. Torque (ft.-lbs.): 1,295, Working Torque (ft.-lb.): 200-900, Tool Weight (lbs.): 4 1/2
The Kawasaki 12V Impact Wrench Set 841337 is perfect for emergency roadside tire changes. Always be prepared with this durable tool which plugs into a 12V DC socket and harnesses 190 ft-lbs of torque. Loosen and tighten vehicle lug nuts quickly and easily. Comes with 2 double-end impact sockets and a pair of 10A safety fuses. This Kawasaki tool delivers outstanding performance when you need it most. Designed for occasional emergency use. Not intended for heavy duty continuous use.
Bosch PS41-2A 12-Volt Max Lithium-Ion 1/4-Inch Hex Impact Driver Kit with 2 Batteries, Charger and Case
This Bosch 12-Volt Max Impact Driver offers the precision of variable speed (0-2,600 RPM), a light body, and a short head length. As powerful as it is compact, the driver packs a punch with a high torque of 930 inch-pounds for coverage of 80% of impact driving applications. This tool is easy to handle in tight, narrow spaces, while its three LEDs mounted around the head of the driver help in low-light settings. Includes: Bosch PS41-2A 12-Volt Max Impact Driver, two lithium-ion 12-volt Max batteries, 1-hour charger, and carrying case. The Bosch 12-Volt Max Impact Driver offers the precision of variable speed, a light body, and a short head length. This tool is easy to handle in tight, narrow spaces, while its three LEDs mounted around the head of the driver help in low-light settings. It comes with two lithium-ion batteries, a charger, and a carrying bag.12V Max Impact DriverAt a Glance:Compact head length and light body for easy use in tight, overhead areasBattery fuel gauge and ergonomic handle for easier use930 in./lbs. for coverage of 80 percent of impact driving applicationsIncludes two 12-volt lithium-ion batteries, charger, and caseOne-year limited warrantyThree-LED light ring illuminates low-light areas. View larger.Its compact design is ideal for working overhead and in tight spaces. View larger.Compact Body for Tight Areas and Overhead WorkThe impact driver features a compact build with a head length of 5.4 inches. This streamlined design makes the drill small enough to fit into tight areas and narrow corners. Along with its reduced size, the driver weighs 2 pounds, making it equally well-suited for continuous overhead work.High Torque for Faster PerformanceAs powerful as it is compact, the driver packs a punch with a high torque of 930 in./lbs. for coverage of 80 percent of impact driving applications. It provides 2,600 rpm and a variable speed trigger for complete control.Battery Fuel Gauge and LEDs for ConvenienceThe driver is user-friendly, with an easy-to-read fuel gauge for effortless battery manag...
The Milwaukee 2601-22 18-Volt Li-ion Compact Drill Kit features a 1/2-inch ratcheting chuck with a plastic sleeve for reduced weight. The Milwaukee 2601-22 has a compact length of 7-3/4-inches to allow it to fit in tight areas. The compact motor on the 2601-22 delivers 400 inch-pounds of maximum torque. The heavy-duty 2-speed metal gear box is not only durable, but allows speeds of 0-350 rpm is low and 0-1,400 in high. Other features include a built-in LED light to illuminate work surfaces. All of these features are packed into a lightweight, 4-pound form factor. Standard equipment includes the drill tool, (2) 18-volt Li-ion batteries (48-11-1815), 30-minute charger (48-59-1801), and carrying case.
Ryobi P234g 18 Volt Impact Driver Lithium-ion (Tool Only, Battery and Charger Not Included0
Factory Warranties will only be honored if this product is purchased through an Authorized Seller. Ask the seller if they are authorized before purchasing.When the heavy driving tasks are at hand, reach for this impact driver. You will be amazed at the power and control when driving long and large screws or bolts. The powerful motor delivers 1,500 in. lbs. of torque that loosens bolts as easily as it fastens them. It features the exclusive MagTrayÂ® and on-board bit storage, which allow convenient placement of bits and screws.
The Makita 18V LXT Lithium-Ion Cordless Impact Driver (model XDT042) delivers power and speed in a compact size for a full range of driving and fastening tasks. The XDT042 features a Makita-built 4-pole motor with variable speed (0-2,300 RPM and 0-3,200 IPM) that delivers 1,420 in. lbs. of Max Torque. At only 5-7/16" long and 3.3 pounds (with battery), the XDT042 has a compact and ergonomic design with less weight for reduced operator fatigue, and a rubberized soft grip for increased comfort on the job. The built-in L.E.D. light illuminates the job area for applications in dark spaces and close quarters. Makita's entire line-up of impact drivers including the XDT042 is engineered with a proprietary hammer and anvil impact mechanism that is manufactured using the best raw materials with the highest quality steel, as well as a unique heat-hardening process for maximum fastening and driving power. The XDT042 is engineered for a wide range of driving and fastening applications. The combination of power and performance in a compact size makes the XDT042 ideal for any pro contractor who requires a best-in-class engineered compact cordless impact driver.
The Porter-Cable PCCK640LB 20V 1/4-Inch Hex Lithium Ion Impact Driver Kit features an impact driver with a high torque motor. The 20V Max Lithium Ion batteries with 1.5-Amp cells deliver more power and runtime in a smaller package. An easy load chuck allows user to insert bit with one hand and the LED Work light provides additional light in dark work areas. As a compact tool (6.2-Inch in length, 3.2-Pound), this impact driver easily fits in tight spaces and reduces fatigue. The battery fuel gauge displays charge remaining in the battery. The compact design of the PCC640 20-volt max 1/4-inch hex impact driver belies its innovative lithium-ion battery power, allowing you to tackle fastening jobs in tight spaces for longer periods of time between charges (view larger). View larger. View larger. Utilizing Porter-Cableâ€™s latest lithium-ion battery platform for power tools, the PCCK640LB 20-volt max 1/4-inch hex lithium-ion impact driver kit includes the tools and accessories necessary to power through the toughest fastening applications. With a compact and lightweight design, the PCC640 impact driver is designed to eliminate user fatigue, but it doesnâ€™t compromise on speed and power thanks to its high-performance transmission and high-torque motor. Combined with two PCC680L lithium-ion compact batteries and a FMC690L lithium-ion charger, the PCCK640LB impact driver kit includes everything you need for a variety of projects, whether youâ€™re assembling HVAC ducts, building a deck, or installing drywall. Lithium-Ion Innovation Porter-Cableâ€™s PCCK640LB 20-volt max 1/4-inch lithium-ion impact driver kit capitalizes on the latest lithium-ion battery platform, allowing for the compact PCC640 impact driver to deliver long-lasting power that gets the job done. The high- torque motor (1,450 inch-pounds) and high-performance variable-speed transmission (0-2,900 RPM/0-3,000 BPM) maximizes efficiency for fastening applications. Monitor the charge level of the included PCC680L 1.5 ...
Manufacturer: Black & Decker
The BLACK+DECKER BDCMTI Matrix Impact Driver Attachment has a compact design for user control for access in tight spaces. Its variable speed allows for precision performance that's right for each job. This impact driver attachment can be used with any tool in the BLACK+DECKER Matrix line including the BDEDMT and BDCDMT112.